Sleeve Anchors for anchoring/fastening to concrete, brick or block.
Customer Testimonials
"I called, the phone was answered by a person that had all the answers to my questions"
Eric Stumph - Dallas, TX

There is some technical information that must be considered when installing and using concrete sleeve anchors. Sleeve anchors are available in four different head styles- flat, hex nut, acorn nut, and round. When working with a concrete sleeve anchor, it is helpful to remember that sleeve anchor diameter is equal to hole diameter. These concrete anchors have heavy-loading capacity and can be used in a wide range of fixture thicknesses and there is no weakened shear area.
| Diam. & Length | Min. Embedment | Bolt Diameter |
| 1/4” x 1-3/8" | 1” | 3/16” |
| 1/4” x 2-1/4" | 1” | 3/16” |
| Diam. & Length | Min. Embedment | Bolt Diameter |
| 5/16” x 1-1/2" | 1” | 1/4” |
| 5/16” x 1-1/2" | 1” | 1/4” |
| 3/38” x 1-7/8" | 1-1/4” | 5/16” |
| 3/8” x 3" | 1-1/4” | 5/16” |
| 3/8” x 4" | 1-1/4” | 5/16” |
| 1/2” x 2-1/4" | 1-1/2” | 3/8” |
| 1/2” x 3" | 1-1/2” | 3/8” |
| 1/2” x 4" | 1-1/2” | 3/8” |
| 1/2” x 6" | 3” | 3/8” |
| 5/8” x 2-1/4" | 2” | 1/2” |
| 5/8” x 3" | 2” | 1/2” |
| 5/8” x 4-1/4" | 3-1/2” | 1/2” |
| 5/8” x 6" | 3-1/2” | 1/2” |
| 3/4” x 2-1/2" | 2” | 5/8” |
| 3/4” x 4-1/4" | 3-1/2” | 5/8” |
| 3/4” x 6-1/4" | 3-1/2” | 5/8” |
| Diam. & Length | Min. Embedment | Bolt Diameter |
| 1-1/4” x 1-3/8" | 1 | 3/16” |
| 1/4” x 2" | 1 | 3/16” |
| 1/4” x 2" Thresh. | 1 | 3/16” |
| 1/4” x 3" | 1 | 3/16” |
| 1/4” x 4" | 1 | 3/16” |
| 3/8” x 2-3/4" | 1-1/4” | 5/16” |
| 3/8” x 3" | 1-1/4” | 5/16” |
| 3/8” x 4" | 1-1/4” | 5/16” |
| 3/8” x 5" | 2 | 5/16” |
| 3/8” x 6" | 2 | 5/16” |
| Diam. & Length | Min. Embedment | Bolt Diameter |
| 1/4” x 1-1/4" | 1” | 3/16” |
| 1/4” x 2" | 1” | 3/16” |
| 1/4” x 2-3/4" | 1” | 3/16” |
| 3/8” x 2-1/2" | 1-1/4” | 5/16” |
Sleeve anchor, sup-r-sleeve, thunderbolt, bolt sleeve anchor, lok bolt, lock bolt, dynabolt, sleeve all, sleeve anchors, concrete anchor, block anchor, masonry anchor.